Low Cost Pediatric Wheelchair DIY Pediatric Wheelchair



Join our
Email List

Frequently Asked

Open Wheelchair Tool List

You will need the following tools to assemble the wheelchair, which can be obtained from any hardware store. The pinion puller is the only specialized tool that you will need, and it can be obtained from the vender listed below.

Hex Wrench Set
Hex Wrench Set (Metric and Inch)
Drill and Drill Bits
You will need:
  1. one #38 or 7/64 inch drill bit,
  2. one #9 (0.196) drill bit
  3. one philips driver bit.
PVC Cutter
PVC Cutter
A power saw can also be used.

Tape Measure

[Site Map] [Terms and Policies] [Licensing Information] [Other Resources] [Sponsors]

© Copyright 2015 Open Wheelchair Foundation. All rights Reserved.

The Open Wheelchair hardware design is licensed under CERN Open Hardware Licence v1.2 and the Software is licensed under the GNU General Public License Version 3. By viewing or using the design posted on this website you are agreeing to these licenses. To view the license see our license page.